Draytek Vigor2830 Series User Manual Download Page 246

Page: 246 / 472

Vigor2830 Series User’s Guide

234

Click any index number link to open the following page.

Available settings are explained as follows:

Item Description

Name

Type a name for such profile. The length of the use name is
limited to 19 characters.

Common Name
Identifier

Type or edit the common name identifier for the LDAP server.
The common name identifier for most LDAP server is “cn”.

Base Distinguished
Name / Group
Distinguished Name

Type or edit the distinguished name used to look up entries on
the LDAP server.

Sometimes, you may forget the Distinguished Name since it’s

too long. Then you may click the

button to list all the

account information on the AD/LDAP Server to assist you
finish the setup.

Additional Filter

This is an optional setting.

After finished the above settings, click

to save and exit this page. A new profile will be

created.

For detailed information about LDAP application, refer to

section 4.14 How to Implement

the AD/LDAP Authentication for User Management?

Summary of Contents for Vigor2830 Series

























































































































































































































































































































































































































































































Search results

Summary of Contents for Vigor2830 Series

Reviews:

Related manuals for Vigor2830 Series

Brands by name

Popular brands

Draytek Vigor2830 Series, User Manual

Search results

Summary of Contents for Vigor2830 Series

Reviews:

Related manuals for Vigor2830 Series

Brands by name

Popular brands