DragonWave AirPair 100-UL, Product Manual

Page: 28 / 130

20
Dragon Wave Inc.
Required Action Steps
Sequence:
lo press Enter
The system responds:
goodbye
save mib Saves the MIB to FLASH. Perform this command to save setting
changes to FLASH. This command does not restart the system and
does not put any new settings into effect.
Sequence:
save mib press Enter
The system responds:
Mib saved successfully.
4.4. Set AirPair Frequency
This section describes how to set the radio frequency and transmit power using the CLI. Before
setting the frequency or transmitting power, ensure that the radio is connected to the modem
through a serial port.
Note: One must be GO and the other must be Return. Vertical and horizontal polarizations are
completed during install.
Procedure 4-3
Set AirPair Frequency available and Transmit Power
Follow this procedure to set the 24 GHz AirPair frequency channels for pre-defined frequency
pairs (coupled frequencies) and to set the gain.
Note: To perform this procedure, you must have NOC user rights.
Required Action Steps
login as an NOC user Logs in as an NOC user.
Sequence:
Enter an NOC username:
Username <
username> press Enter
Enter an NOC password:
Password: <
password> press Enter
AirPair 100 UL 24 GHz Product Manual