Operation in Measurement Mode
23
Operating Ins
tructions V
amos, 1
. US ed.
Applying the Oxisensor I-20 (Option)
●
Cut nails if necessary.
●
Remove nail varnish where applicable.
●
Remove the protective backing from the adhesive patch.
●
Place the sensor with the sticky side up on a flat surface.
●
Place the fingertip of the index finger centrally over the
optical element on the opposite side of the sensor to the
lead, and wrap the lateral adhesive tabs around the finger.
●
Bend the other side of the sensor over the fingertip and
position it on the underside of the finger so that the
markings line up exactly.
Press on the sensor, and wrap the lateral adhesive tabs
around the finger.
NOTE:
With very obese patients, a thinner finger might be more
suitable than the index finger.
Applying the Oxisensor I-20 (Option)
Self-adhesive sensor for short and long-term monitoring of
patients with limited movement and activity and a body weight
ranging from 3 kg to 15 kg (6.6 to 33 lbs).
●
Remove protective backing from the adhesive strip.
●
Position sensor on the underside of the big toe, so that the
dotted line is aligned along the inner edge of the toe, and
the marking is over the middle of the toe.
●
Wrap sensor around the toe, so that the other marking point
lies directly over the toenail.
●
Fix sensor lead to the foot with the additional adhesive strip.
0
1
53
7
1
63
0
1
63
7
1
63
01
7
3
71
6
3
RETURN TO THIS MANUAL'S TABLE OF CONTENTS
RETURN TO CD-ROM TABLE OF CONTENTS
