Dräger BiliLux, Instructions For Use Manual

Page: 82 / 90

82 Instructions for use BiliLux
Technical data
14.10.6 Enclosure port immunity
Test
frequency
(MHz)
Band
1)
(MHz)
1) For some services, only the up-link frequencies are included.
Service
1)
Modulation
2)
2) The carrier shall be modulated using a 50% duty cycle square wave signal.
Maximum
power
(W)
Distance
(m)
Immunity
test level
(V/m)
385 380 to 390 TETRA 400 Pulse
modulation
2)
18 Hz
1.8 0.3 27
450 430 to 470 GMRS 4460,
FRS 460
FM
3)
± 5 kHz deviation
1 kHz sine
3) As an alternative to FM modulation, 50% pulse modulation at 18 Hz may be used because, while it
does not represent actual modulation, it would be worst case.
2 0.3 28
710 704 to 787 LTE Band 13,
17
Pulse
modulation
2)
217 Hz
0.2 0.3 9
745
780
810
800 to 960 GSM 800/900,
TETRA 800,
iDEN 820,
CDMA 850,
LTE Band 5
Pulse
modulation
2)
18 Hz
2 0.3 28
870
930
1720 1700 to 1990 GSM 1800;
CDMA 1900;
GSM 1900;
DECT; LTE
Band 1, 3, 4,
25; UMTS
Pulse
modulation
2)
217 Hz
2 0.3 28
1845
1970
2450 2400 to 2570 Bluetooth,
WLAN, 802.11
b/g/n, RFID
2450, LTE
band 7
Pulse
modulation
2)
217 Hz
2 0.3 28
5240 5100 to 5800 WLAN 802.11
a/n
Pulse
modulation
2)
217 Hz
0.2 0.3 9
5500
5785
NOTE: If necessary to achieve the immunity test level, the distance between the transmitting antenna
and the ME equipment of ME system may be reduced to 1 m. The 1 m test distance is permitted by
IEC 61000-4-3.