Dräger BiliLux, Instructions For Use Manual

Page: 80 / 90

80 Instructions for use BiliLux
Technical data
Radiated RF
IEC 61000-4-3 3 V/m
80 MHz to 2.7 GHz E1=3 V/m
80 MHz to 800 MHz
800 MHz to
2.5 GHz
where P is the maxi-
mum output power
rating of the transmit-
ter in watts (W)
according to the trans-
mitter manufacturer
and
d is the recom-
mended separation
distance in meters
(m).
Field strengths from
fixed RF transmitters,
as determined by an
electromagnetic site
survey
1)
, should be
less than the compli-
ance level in each fre-
quency range
2)
.
Interference may
occur in the vicinity of
equipment marked
with the following
symbol:
1) Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless) telephones and
land mobile radios, amateur radio, AM and FM radio broadcast and TV broadcast cannot be predicted the-
oretically with accuracy. To assess the electromagnetic environment due to fixed RF transmitters, an elec-
tromagnetic site survey should be considered. If the measured field strength in the location in which the
device is used exceeds the applicable RF compliance level above, the device should be observed to verify
normal operation. If abnormal performance is observed, additional measures may be necessary, such as
reorienting or relocating the device.
2) Over the frequency range 150 kHz to 80 MHz, field strengths should be less than [ V
1
] V/m.
Immunity test IEC 60601 test
level Compliance level Electromagnetic
environment
D 1.2 P =
D 2.3 P =