17. Add-on Controller
82
Dr. A. Kuntze
I
Gutes Wasser mit System
Robert-Bosch-Str. 7a
40668 Meerbusch
+49 (0) 2150-7066-0 / Fax -60
www.kuntze.com
17. Add-on Controller
The add-on Controller offers a concentration-based controller with two independently configurable
control relays. When you activate the add-on, the main menu shows an additional symbol CONTROL.
In the main menu select the symbol CONTROL. In the CONTROL
menu you find the following submenus:
S1/S2 CONTROL, in which you can define the set point, the controller
type, and its corresponding parameters.
S1/S2 CONFIG, in which you define the controller output via the relays,
i.e. pulse-pause or pulse-frequency.
In the submenu RELAY you define the acting direction, i. e. whether dosing should happen when the
measured value is above or below the set point. In this menu you can also turn off relays if you want to
use the current outputs as controller output.
In the submenu TIMING you can define a start delay and dosage-check times.
