12. System functions
51
Dr. A. Kuntze
I
Gutes Wasser mit System
Robert-Bosch-Str. 7a
40668 Meerbusch
+49 (0) 2150-7066-0 / Fax -60
www.kuntze.com
Selection: S1 or S2 (add-on controlller)
This adds an analog bar indicating the controller output for set point 1
or 2, respectively, in %.
Selection: Relays (add-on controller)
This adds the status of all three relays and the mode. Active relays are
shown white on black, and the symbol shows whether the relay is open
or closed. See relay 3 in the example shown.
Selection: Flow (add-on volume based dosing)
This adds the calculated flow rate, the controller output in %, and the
status of relay 2.
Autolock
The autolock function ensures that an invalid code is set after an adjustable interval without operation,
even if you have forgotten to change the code manually before leaving the instrument. Autolock sets
the code back to 0000, and the display shows the desktop with the measured values. If you set the in-
terval to 0, the autolock function is deactivated.
Eco mode
Eco mode turns off the display illumination after an adjustable interval. If you set the interval to 0, eco
mode is deactivated, and the illumination remains on permanently.
Note
The eco mode not only saves energy, it also extends the life span of the
display.
