DPS Telecom D-PK-NGDLT, User Manual

Page: 40 / 86

34
Fig. 11.3.1 Operate the control relay by clicking on one of the actions in the Commands field.
Note: If the control is configured as a derived control, the command buttons will be disabled.
Monitor Analogs 11.4
The
Monitor
menu >
Analogs
screen provides a description of each analog channel, the current reading, the
units being read, and alarm conditions (major under, minor under, major over, minor over) according to your
temperature settings.
Fig. 11.4.1 Click on Analogs in the Monitor menu to view the current channel readings.
Monitor Sensors 11.5
In the Monitor > Sensors menu, you can monitor all configured digital "D-wire" sensors (including the Internal
Temperature sensor if your NetGuardian has this option). The most recent sensor measurement will be shown,
and any alarm thresholds crossed will be shown in either orange for minor alarms, red for major alarms or red
for not detected.
Fig. 11.5.1 View the current status of all attached sensors in the Monitor>Sensors menu.