Douwe Egberts Cafitesse 110, Service Manual

Page: 67 / 93

Cafitesse 100 Next Generation Functions - water system
August 2009
5A-9
Fig. 3
Undo the 2 screws on the front of the cooling
compartment (see chapter A.2.3)..
Tilt up the complete cooling compartment (see see
chapter A.2.3).).
Extract the 2 bolts from the cavity on each side
of the inside wall and place it in the adjacent
hole to support the cooling compartment (see see
chapter A.2.3).).
Pull the cable harness(es) heating elements
upwards to the boiler lid (fig. 1).
Undo the 2 flat connectors of the temperature
sensor (see chapter 2.4).
Remove the connector from the level sensor
(see chapter 2.4).
Disassembly of the boiler lid
Undo the 4 screws (4) on the boiler lid (fig. 3).
Remove the hose clamp and undo the water
inlet hose (5) from the boiler lid (fig. 3).
Unfix the 2 clamps on the boiler lid and remove
the boiler lid.
•
•
•
•
•
•
•
•
•
4 5
4