Douwe Egberts Cafitesse 110, Service Manual

Page: 62 / 93

Cafitesse 100 Next Generation Functions - water system
5A-4
August 2009
1
WARNING: The water in the boiler is hot.
Beware of the risk of scalding.
Keep your hands and other
parts of your body away from
the hot water.
Note:
Due to the high temperatures
of the boiler‘s components, it is
advisable to allow the boiler to cool
down for several minutes or to rin-
se the boiler by refilling cold water
and draining it before commencing
any work.
Disconnect the dispenser from the power supply
system and close the water tap.
Remove the cuptray and the driptray and open pen
the dispenser door.
Remove the product pack from the cooling com-
partment and store it in the refrigerator.
Only if you serve a cafitesse 110 NG dispenser:
Unscrew the 2 releasable rivets on the cover
coolbox (see chapter A.2.2).
Pull down the cover fluid treatment (see chapter
A.2.2).
Undo 2 releasable rivets at the splash panel and
remove the overflow hose on the inside of the
splash panel (see chapter A.2.2)..
Remove the splash panel together with the cover
fluid treatment and drain the boiler (see chapter (see chapter see chapter
A.2.2).)..
Unscrew the door stop (1) at the top (fig. 1).
Undo the 3 screws (2) on the dispenser cover
plate (fig. 1). (fig. 1). )..
Remove the dispenser cover plate (fig. 1). )..
On assembly, note the following:
Hook the dispenser cover plate at the rear into the
corresponding grip (3) (fig. 2).
Tilt up the cooling compartment
Undo the 2 screws (4) on the front of the cooling
compartment (5) (fig. 3). (5) (fig. 3). (fig. 3). .
Tilt up the complete cooling compartment (fig. 3).
•
•
•
•
•
•
•
•
•
•
•
•
A.2.3 Disassembly of the outlet valves and the overboil sensor
Fig. 3
Fig. 1
Fig. 2
2
3
4 5