Douwe Egberts Cafitesse 110, Service Manual

Page: 66 / 93

Cafitesse 100 Next Generation Functions - water system
5A-8
August 2009
Fig. 1
Fig. 2
2
A.2.5 Disassembly of the boiler lid and the heating elements
WARNING: The water in the boiler is hot.
Beware of the risk of scalding.
Keep your hands and other
parts of your body away from
the hot water.
Note:
Due to the high temperatures
of the boiler‘s components, it is
advisable to allow the boiler to cool
down for several minutes or to rin-
se the boiler by refilling cold water
and draining it before commencing
any work.
Disconnect the dispenser from the power supply
system and close the water tap.
Remove the cuptray and the driptray and open pen
the dispenser door.
Remove the product pack from the cooling com-
partment and store it in the refrigerator.
Only if you serve a cafitesse 110 NG dispenser:
Unscrew the 2 releasable rivets on the cover
coolbox (see chapter A.2.2).
Pull down the cover fluid treatment (see chapter
A.2.2).
Undo 2 releasable rivets at the splash panel and
remove the overflow hose on the inside of the
splash panel (see chapter A.2.2)..
Remove the splash panel together with the cover
fluid treatment and drain the boiler (see chapter (see chapter see chapter
A.2.2).)..
Remove the plug(s) of the cable harness(es)
heating elements (1) from the power pack (fig 1).
Unscrew the door stop at the top (see chapter
A.2.3).
Undo the 3 screws on the dispenser cover plate
(see chapter A.2.3)..
Remove the dispenser cover plate and turn up
the frame (2) (fig. 2). (fig. 2). .
•
•
•
•
•
•
•
•
•
•
•
1