46
Crane 4000LE
07-2022
RL6002-003
Chapter 12
Crane 4000LE Wiring, Setup and Troubleshooting Manual
In-ground Motion Assist 360 drive and speed control
Remote control enclosure
Jumper
12.2.4 Control
unit
Night shield terminal block jumper.
Jumper must be installed between terminals 3 and 40.
Fig. 12.2.2 Night shield jumper
12.3 Learning cycle safety and information
12.3.1 Danger due to inactive safety equipment.
WARNING
Life threatening danger due to inactive safety
equipment!
During the learning cycle, safety equipment
required for normal operation is not yet
operational. Persons present in the revolving
door during the learning cycle may sustain
injuries.
• Insure that no one is present in the area of
the wings.
• Start the learning cycle only after everyone
has left the area.
12.3.2 Danger due to automatic startup of revolving
door.
WARNING
Life-threatening danger due to automatic
startup of revolving door!
12.3.3 Risk of material damage.
CAUTION
Remove all objects inside the revolving door.
Material damage due to objects left in the
revolving door during the learning cycle!
12.3.4 Basic parameter settings.
CAUTION
Basic parameters (Para. 11.1) must be entered
before starting the learning cycle!
12.3.5 Mode
switch.
TIPS AND RECOMMENDATIONS
The Mode switch has no function during the
learning cycle.
12.3.6 dormakaba handheld.
TIPS AND RECOMMENDATIONS
The dormakaba handheld can be used to
initiate the learning cycle and edit parameters.
