69
Crane 2000LE and 3000LE
05-2021
DL6001-003
Crane 2000LE and 3000LE Wiring, Setup and Troubleshooting
In-ground Motion Assist 360 drive with Remote Control Enclosure
Chapter 19
6
6
7
13
Fig. 19.1.6 Foam rubber seals installation
6
6
5
5
7
13
13
Fig. 45.1.7 Outer container lid installation
19.2 Install
floor
cover plates
19.2.1 Install in-ground container floor
cover plates.
WARNING
Program switch must be in Off
position.
WARNING
Press an Emergency Stop
pushbutton.
1. Align floor cover plates with building
interface.
2. Install two cover plates using fastener in
Fig. 19.2.2.
• Snug, do not overtighten fasteners.
CAUTION
Floor cover plates must be flush
with finished floor surface.
Fig. 19.2.1 Floor cover plate
1
Floor
cover plate ,
14 Ga. SS, DC6048
1
Ø 32”
12
10-32 x 3/8" sealing
flat head screw, SS
DF6026-01C
Fig. 19.2.2 Sealing flat head screw
12
Fig. 19.2.3 Floor cover plate fasteners
12
10-32 x 3/8" sealing
flat head screw, SS
DF6026-01C
1
1
Fig. 19.2.4 Floor cover plates installed
1
Floor
cover plate ,
14 Ga. SS, DC6048
(8)
12
(8)
12
Building
interface
5
Outer section container
lid DS6033
6
Foam rubber seal,
DC6047
7
Container lid center
section DC6049
13
1/4-20 x 3/4" sealing
flat head screw
DF6025-01G
