63
Crane 2000LE and 3000LE
05-2021
DL6001-003
Crane 2000LE and 3000LE Wiring, Setup and Troubleshooting
In-ground Motion Assist 360 drive with Remote Control Enclosure
Chapter 18
18.1.2 Emergency stop pushbutton test -
Mode switch Automatic 2 mode.
2.1 Activate Emergency Stop pushbutton.
Step Action Result
1.
Set Mode switch to
Automatic 2.
2.
Door will continuously rotate at low energy speed.
3.
Press Emergency Stop
pushbutton while door is
rotating.
Revolving door stops
immediately and
drive is disengaged.
The door can be
manually rotated.
2.2 Restart after Emergency Stop.
1.
Unlock all Emergency
Stop pushbuttons.
2.
Door will continuously rotate at low energy speed.
2.3 Repeat Emergency stop test for each
Emergency Stop pushbutton.
1.
Repeat steps in
2.1
and
2.2
for each Emergency Stop pushbutton.
WARNING
Risk of injury due to deactivated safety
equipment!
After the Emergency Stop pushbutton is
activated, the drive is unlocked. The safety
devices are no longer in operation. This can cause
serious injuries if attempts are made to rotate
the door manually.
• Before turning the door manually, check to
make sure that no one is present in or next to
the door.
• If people have been locked into the revolving
door, carefully rotate the door unit people are
able to exit.
• When turning the door manually, make sure
there are no limbs between the closing edges.
TIPS AND RECOMMENDATIONS
All emergency stop pushbuttons must be
unlocked to test the restart function.
