23
Crane 2000LE and 3000LE
05-2021
DL6001-003
Crane 2000LE and 3000LE Wiring, Setup and Troubleshooting
In-ground Motion Assist 360 drive with Remote Control Enclosure
Chapter 6
6.10 Connect 115 Vac and earth ground cable from remote enclosure to
customer 115 Vac distribution panel
Fig. 6.10.2
Detail "A":
Fig. 6.10.1
Remote enclosure DC cables and 115 Vac wiring
1
Motion Assist 360
power supply DX6001
2
Motion
Assist
360
control unit DX6002
3
Power
extension
cable
4
Hall sensor extension
cable
5
Earth ground wire to
in-ground container
7
Customer
115
Vac
7.1
Customer earth
ground wire
6.10.1 Connect 14 AWG earth ground cable from
remote enclosure to customer distribution panel
ground.
1. Connect one end of earth ground cable to Motion
Assist 360 power supply fastener as shown in
Fig. 6.10.2.
2. Route earth ground wire from remote enclosure to
customer distribution panel.
3. Connect earth ground wire to ground.
6.10.2 Connect 115 Vac from customer distribution
panel to Motion Assist 360 power supply
115 Vac plug.
CAUTION
Customer 115 Vac circuit breaker must be OFF!
1. Connect 115 Vac wiring to Motion Assist 360 power
supply 115 Vac plug as shown in Fig. 6.10.4
WARNING
Work on electrical equipment and 115 Vac
wiring installation must be performed only by
qualified personnel
!
Remote enclosure internal panel
DC wiring
conduit
115 Vac conduit
7
7.1
1
2
3
4
5
Enclosure
ground wire
5
Detail “A”
3
5/16 x 1/2" SHCS,
SS DF6018-01G
4
5/16"" flat washer,
DF6019-01G
8
External
tooth
lock
washer DF6016-01G
5
Earth ground wire to
in-ground container
7.1
Customer earth
ground wire
5
7.1
5
3
4
Fig. 6.10.3
Motion Assist 360 power supply
1
Motion Assist 360
power supply
2
Plug for customer
115 Vac wiring
3
115
Vac
cable
to
control unit
Fig. 6.10.4
Inlet socket AC plug, customer 115 Vac
1
2
3
N
L
2
4
4
L
N
1”
1/4”
4
