Connect Motor and Encoder Harnesses
OR
#1 Endcap
SYNC
TXD
GND
RXD
PGM
ENC
Breakout
2-1/8”
#2 Header Bottom
Recommended Locations for Mode Switch.
(Phillips screwdriver required).
#6-32 x ½”
SYNC
TXD
GND
RXD
Breakout
PGM
ENC
Place Mode Switch in opening and fasten.
ED700
Low Energy
Automatic Swing Door
DORMA
8
DORMA AUTOMATICS, Inc.
924 Sherwood Drive
Toll-Free: 877-367-6211
Lake Bluff, IL 60044
Fax: 877-423-7999
DL3038-010 Rev. B
6
/08
E-mail:
Subject to change without notice
ENC
Controller installation.
Fasten using supplied mounting pads to
the back of the controller and the header.
SYNC
TXD
GND
RXD
PGM
Breakout
INSTALL THE CONTROLLER and ON OFF HOLD SWITCH (PROGRAM)
1
2
2
1
DO NOT PLUG MOTOR HARNESS INTO POWER, IT WILL DAMAGE MOTOR!
PGM
ENC
Breakout
SYNC
GND
TXD
RXD
3/4”
1 1/2”
Drill #36 (Ø.107)
(2plcs)
Drill Ø1” hole for clearace.