Precautions
10
D760.H03E-001.H1907
11. Make sure to use only the oils and greases stipulated in this manual; otherwise it
may cause the truck malfunction, damage and even personal injury.
12. If the alarm lamp stays on or flashes when the engine is running, then it indicates
that some part is in trouble. In this case, please contact the Technical Service
Center (Station) authorized by Dongfeng Commercial Vehicle Co., Ltd as soon as
possible.
13. Friction pad and brake disc should use original parts, otherwise it will bring serious
consequences;
14. Never extend the head and hands outside the window when the power window is
rising. In this course, if the body or other objects are nipped between the window
and door frame, always move the glass downward immediately. When operating
the power glass regulator switch on the passenger's side, the driver shall ensure
that there is no obstacle affecting the correct closing of the window.
15. Do not place corrosive articles or hard pointed objects into the storage box. And no
heavy load is allowed on the storage box cover.
CAUTION:
Failure to observe the requirement with a caution mark will result in per-
sonal injury or damage to component assembly or complete vehicle.
1. Observe the truck operation specifications strictly.
2. Check that all doors are closed properly before starting the truck. Always lock the
door only with a key when you are outside the vehicle; never lock the door by
moving the lock knob forwards while pressing the outer unlocking button to close
the door.
3. The master power switch shall never be turned off when the engine is running.
Never turn the key to START position when the engine is running to avoid
damaging the starter.
4. Never use the washer without washer fluid.
5. When the A/C compressor needs to be restarted after being shut off, please wait
for 3-5 min; otherwise, the service life of the compressor will be affected.
6. For the sake of safety, do close the ash tray before leaving the truck.
7. When getting power via the working lamp socket, the electrical load is strictly
prohibited to exceed the nominal capacity of the socket.
8. Trailer connection should be done in flat place, make the parking brake working
and fix the wheels by triangular stopper. When connecting the connector with
tractor, make sure the right pipes are connected.
9. Before adding coolant, check the engine and the radiator for leakage, and repair it
if any. It is recommended to use long-life antirust and anti-freeze coolant. Never
use the running water or hard water from well or river.
10. Normally do not screw off the pressure valve cap of the auxiliary water tank; if it is
necessary to do so, be careful to avoid scalding.
11. Check the engine oil level only when the truck stops. Make sure to drain the
lubricating oil off after the engine completely stops. Note the hot oil to avoid scald
during the oil draining.
Summary of Contents for DFH4180 Series
Page 2: ......
