Structure and Operation
18
D760.H03E-001.H1907
5. Pull the backrest angle adjustment handle to adjust the backrest angle to the
appropriate position. Release the handle and lock the backrest angle.
CAUTION:
1.Please adjust the seat in case of driving safety.
2. For front and rear adjustment and angle adjustment, the handle should
be pulled in place to ensure complete separation of the mechanism
before adjustment.
3.After the completion of the whole process, all handles should be in
place to ensure the locking of all parts is reliable.
4.When encountering a particularly bumpy road surface, please turn the
seat damping adjustment wrench to the lowest end to keep the seat
balanced.
Driver seat cushion depth
1. The seat slide rail is in the last position;
2. On the basis of graphic method, adjust
backrest angle to 11 °, this is normal driving
position.
3. On the basis of 1 and 2, the seat cushion
depth shall be measured according to the
requirements of the drawing.
1. Normal use and back angle of seat
depth measurement
2. Seat cushion depth
3. Seat cushion tilt angle
4. Measure along the center line of
the seat
Summary of Contents for DFH4180 Series
Page 2: ......
