Structure and Operation
D760.H03E-001.H1907
59
Horn switch
By default, press the horn switch and the
electric horn will ring. To switch the air horn,
press the air horn selection switch.
Turn signal lamp
When the left handle of the combination
switch is pushed forward, the right front turn sig-
nal light, the right rear turn signal light and the
right turn signal light will be lit; When the left
handle of the combination switch is turned back,
the left front turn signal light, the left rear turn
signal light and the left turn signal light are lit.
Switching between low and high beam light
When the light knob is in front of the light,
the near light is turned on
.
When the combination switch is operated
to the "middle" position, the high beam light will
be lit; Switch back to the original light state.
When the combination switch is operated
to the "up" position, the high beam light will be
lit; After the switch is back in position, the light
completes a switch.
Idle stop
Cummins series engine has idling stop
characteristics.
By idling the engine for a period of time
(without driving operation), idling stop can
reduce fuel consumption and extend engine life.
Before stopping, the engine maintenance alarm
light flashes for about 30 seconds, warning the
driver of impending shutdown. The driver can
cancel the stop and simply step on the brake,
clutch or accelerator pedal during the warning
period.
Windshield wiper and washer switch
1. Original position
2. Middle position
3. Up position
1. Engine stop warning indicator
2. Engine maintenance warning
indicator
Summary of Contents for DFH4180 Series
Page 2: ......