manualshive.com logo in svg

DongFeng DFH4180 Series, User Manual, Page: 114 / 251

Share
Download
DongFeng DFH4180 Series User Manual Download Page 114

Structure and Operation

104

D760.H03E-001.H1907

System time

The display supports setting the time and time display format. The time format 

can be set to 24h and AM/PM. The date display format can be set to xxx-yy-dd and 
dd-yy-xxxx.

Safe driving mode

Safe driving mode refers to the bus speed 

≤

 5km/h and lasts for 10s. Safe driving 

mode can be manually selected to open and close, factory default open, close the 
need for user password. When safe mode opens, under the condition of the safety 
(bus speed of 5 km/h, or for 10 s), and display in a video broadcast, e-book reading, 
image recognition, pop-up prompts "vehicle, do not use to watch the video (do not use 
e-book reading function/do not watch picture)", to suspend play video, click on the hint 
to exit the current function interface.

System upgrade

The system supports U disk upgrade, insert U disk with upgrade program, auto-

matically enter the upgrade prompt interface after ACC ON, click "confirm" and then 
the upgrade action can be carried out, otherwise the upgrade action will not be carried 
out, and the upgrade progress can be checked through the progress bar during the 
upgrade process.

CAUTION: 

The usb flash drive with the upgrade procedure is required for upgrade. It does 
not support online upgrade. The power will be kept on during the upgrade pro-
cess.

Factory data reset

The factory Settings will restore all system memory items and application mem-

ory items to the factory state, including navigation, voice recognition, calendar, calcu-
lator, e-book and other applications. User password is required to restore factory 
Settings.

Summary of Contents for DFH4180 Series




























































































































































































































































Reviews:

No comments