Starting & Driving
D760.H03E-001.H1907
153
Regardless of AT or MT, A or M may be
displayed. "M" displayed for MT. "A" displayed
for AT.
MT operation
Shift the transmission to M gearshift mode.
Uplift the gear lever for uplifting; if time for
uplifting is not more than 1.5s, one gear will be
increased, if more than 1.5s, two gears will be
increased, and if uplifting is kept, two gears will
be increased until the highest gear is reached.
Press the gear lever downward for downshift; if time for uplifting is not more than
1.5s, one gear will be decreased, if more than 1.5s, two gears will be decreased, and
if down-pressing is kept, two gears will be decreased until the lowest gear is reached.
AT operation
Shift the transmission to A gearshift mode.
1. Auto selection of transmission system:
STRAT, UPSHIFT and DOWNSHIFT, and
the clutch and gearshift can be completed
automatically.
2. Manual interference on gearshift can be
realized, and in "A" mode, direct uplifting
and downpressing of the gear lever can
realize direct gearshift.
CAUTION:
1.It is possible to turn the gear lever to "N" position from any position at
any time;
2.The engine is under the automatic control of the transmission, so it is
not necessary to release the throttle pedal during gearshift;
3.The transmission has protection function, so it will not perform
incorrect gearshift;
4.During driving, observe the tachometer display; in order to guarantee
economic driving, ensure that the engine speed is within the
economic speed range and drive in the high range as much as
possible, but downshift in advance is required before driving up or
down on a slope.
Combination switch for
upshift and downshift
Summary of Contents for DFH4180 Series
Page 2: ......
