Starting & Driving
D760.H03E-001.H1907
157
CAUTION:
1.It is better to drive the vehicle in linkage mode for a short time as much
as possible. In linkage mode, clutch wear is considered as abnormal
wear, so it is required to shorten the driving time in linkage mode as
much as possible.
2.2. The vehicle should be stopped before application of linkage mode,
and the engine speed should be between idle speed and low speed
range (1,000 rpm).
3.3. Before driving in creeping mode, shift the transmission into "N", "2",
"1" or "R", direct shift into linkage mode is not allowed at other gears
due to the protection function.
4.In linkage mode, manual operation of the gear lever by the driver will be
ineffective, that is no manual interference on gearshift is allowed.
5.It is allowed to shift from DM to D, but it is prohibited to shift from RM to
R.
6.With regard to the model with AMT of Dongfeng, it is specified that D, N
and R shall be displayed on the instrument, but display of RM and DM
on the instrument is not required.
Summary of Contents for DFH4180 Series
Page 2: ......
