48
6.- SERVICE FUNCTIONS
MAINTENANCE WARNING
The machine requires automatically the intervention of the maintenance service when reaching a
certain number of preselected washes (programmes), through the message:
MAINT.
REQ.
This message is displayed at the beginning of each programme, and it is repeated in each
successive START until the maintenance technician disables it.
LANGUAGE SELECTION
ACCESS CODE 201
Messages can be displayed in five languages. To change from one language to another press the
access 201, followed by ENTER.
Enter the number of the corresponding language a press ENTER.
Language
Code
ITALIAN 1
ENGLISH
2
GERMAN
3
SPANISH 4
FRENCH
5
CONFIGURATION FOR 16 OR 24 RELAYS
ACCESS CODE 205
Enter the access code 205 to change the configuration from 16 to 24 relays or from 24 to 16
relays, the following message will be displayed:
16 or 24
With a card of 24 relays, they will also be displayed after entering the access code 205 during the
programming of the relays from 17 to 24
The machine, during initialization or after access code 181, (memory total erasure) is configured
for 16 relays.
MAXIMUM NUMBER OF R.P.M.
ACCESS CODE 207
Through the access code 207 it is possible to check and/or modify the maximum number of r.p.m
at which the drum can be programmed by the user (default value=999). The screen displays:
Max Sp. 999
if the displayed value is correct press RESET. If it is necessary to change the value press ENTER,
the value of r.p.m and press ENTER again. The screen will display:
YES
