51
EEPROM MEMORY ERASURE
ACCESS CODES 220
For maintenance reasons, it is possible a total or partial erasure of the memory. With access code
220, all the programmes and steps will be erased, but the machine parameters and cycle 99 of anti
swinging "Unroll-cycle" won't be affected
After having entered the access code, the screen will display:
DELETE EEPROM ?
Press ENTER to continue, the screen will display
DELETE
EEPROM
for a few seconds, and it will completely exit the erasure routine.
To override the erasure press RESET.
MEMORY CARD
ACCESS CODES 221 - 222
It is possible to transfer all the existing programmes in the memory (EEPROM) of the machine to
an external memory of card credit type and vice versa (memory card).
This allows the recording and subsequent use of an unlimited QUANTITY of programmes.
A.-
In order to transfer the content of EEPROM memory in the machine to the memory card press
START and RESET simultaneously and then enter the access code 221, followed by ENTER; the
screen will display the message:
COPY TO M. CARD ?
press ENTER:
COPY
TO
M.
CARD
and after a few seconds:
COPY
OK
B1.-
In order to transfer the programmes and contents in the memory card to the EL6 memory
enter the access code 222 followed by ENTER.
The following message will be displayed:
COPY FROM M. CARD ?
ENTER for confirmation:
COPY FROM M. CARD
and a few seconds later:
COPY
OK
