User manual DPC Touch V2
DOC.60352-11/20
37
3.8 Controller Parameters - Others
3.8.1 Others - Real time encoders monitoring
This interface helps to verify if the encoders are functioning correctly.
The displayed values change with the movement of the positioning arm.
3.8.2 Others - Input monitoring
This interface helps to verify the status of input signals.
3.8.3 Others - Outputs test
This interface can force output signals in order to test wiring.
3.8.4 Others - Touch Screen Calibration
Press the
START
button to enter touchscreen calibration mode. Press and
hold indicated positions for a few seconds in order to calibrate the screen.
Attention
If the screen calibration is not done correctly, the touch screen might
not work. Press for 10 seconds on the screen to start the calibration
menu.
3.8.5 Others - Sounds
Adjust sound volume by using the slide bar.
Select desired sounds for Position OK, Alarm and Cycle complete signals.
