User manual DPC Touch V2
DOC.60352-11/20
7
1. INFORMATIONS
1.1 IMPORTANT
The DPC TOUCH V2 delivered with this manual may have been modified for
specific needs.
If this is the case, when ordering a replacement or spare parts, please indicate
the controller serial number written on our shipping note, or contact
DOGA
at
+33 1 30 66 41 41.
In this way, you will be sure to get the required controller and/or spare parts
1.2 Product Reference
1.3 General Equipment Description
To ensure quality production, it is necessary to count, control, sequence and to
display assembly steps. Our Posi-Control interface, DPC Touch V2, is the
ideal tool for autonomous workstations or line production. It was developed by
DOGA to address all application requirements. The DPC Touch V2 is versatile
and compatible with most tightening tools on the market. It guides the operator,
even a novice, through every step of an assembly process to ensure a zero
default assembly.
Description
DPC TOUCH V2
Type
POSITION CONTROLLER
