Dodge Journey 2018 Owner'S Manual Download Page 419

Page: 419 / 519

Right-Hand Switch Functions

•

Push the top of the switch to increase the volume.

•

Push the bottom of the switch to decrease the volume.

•

Push the button in the center of the switch to change

modes (i.e., AM, FM, etc.).

Left-Hand Switch Functions For Radio Operation

•

Push the top of the switch to SEEK the next listenable

station up from the current setting.

•

Push the bottom of the switch to SEEK the next listen-

able station down from the current setting.

•

Push the button in the center of the switch to tune to the

next preset that you have programmed.

Left-Hand Switch Functions For Media (i.e., CD)
Operation

•

Push the top of the switch once to listen to the next track.

•

Push the bottom of the switch once either to listen to the

beginning of the current track or to listen to the begin-

ning of the previous track if it is within eight seconds

after the current track begins to play.

•

Push the switch up or down twice to listen to the second

track, three times to listen to the third track, and so forth.

•

Push the button located in the center of the switch to

change to the next preset that you have programmed.

IPOD/USB/MP3 CONTROL

This feature allows an iPod or external USB device to be

plugged into the USB port.
iPod control supports Mini, 4G, Photo, Nano, 5G iPod and

iPhone devices. Some iPod software versions may not fully

support the iPod control features. Please visit Apple’s

website for software updates.
For further information, refer to the Uconnect Owner’s

Manual Supplement.

UCONNECT MULTIMEDIA — VIDEO
ENTERTAINMENT SYSTEM (VES) — IF EQUIPPED

Your rear seat Video Entertainment System (VES) is de-

signed to give your family years of enjoyment. You can

play your favorite CDs or DVDs, listen to audio over the

wireless headphones, or plug and play a variety of stan-

dard video games or audio devices. Please review this

Owner’s Manual to become familiar with its features and

operation.
NOTE:

The screen is located in the 2nd row overhead

console.

MULTIMEDIA

417

Summary of Contents for Journey 2018








































































































































































































































































































































































































































































































































Search results

Summary of Contents for Journey 2018

Reviews:

Related manuals for Journey 2018

Brands by name

Popular brands

Dodge Journey 2018, Owner'S Manual

Search results

Summary of Contents for Journey 2018

Reviews:

Related manuals for Journey 2018

Brands by name

Popular brands