Dodge Journey 2018 Owner'S Manual Download Page 463

Page: 463 / 519

2. After loading the mobile phonebook, select Phonebook

from the Phone main screen, then select the appropriate

number. Press the “+” next to the selected number to

display the options pop-up. In the pop-up select “Add

to Favorites.”

NOTE:

If the Favorites list is full, you will be asked to

remove an existing favorite.
3. From the Phone main screen, select Phonebook. From

the Phonebook screen, select the “Favorites” button on

the touchscreen and then select the “+” button on the

touchscreen located to the right of the phonebook re-

cord. Select an empty entry and press the “+” on that

selected entry. When the Options pop-up appears, press

“Add from Mobile.” You will then be asked which

contact and number to choose from your mobile phone-

book. When complete the new favorite will be shown.

Phonebook Favorites

Add From Mobile

MULTIMEDIA

461

Summary of Contents for Journey 2018








































































































































































































































































































































































































































































































































Search results

Summary of Contents for Journey 2018

Reviews:

Related manuals for Journey 2018

Brands by name

Popular brands

Dodge Journey 2018, Owner'S Manual

Search results

Summary of Contents for Journey 2018

Reviews:

Related manuals for Journey 2018

Brands by name

Popular brands