manualshive.com logo in svg

Dodge Journey 2018, Owner'S Manual

The Dodge Journey 2018 Owner's Manual is now available for free download at manualshive.com. This comprehensive manual provides essential information and guidelines for operating and maintaining your Dodge Journey. Download the manual today to access detailed instructions and support for maximizing your driving experience with this outstanding vehicle.

Share
Download
background image

WARNING!

•

Take care to avoid the radiator cooling fan whenever
the hood is raised. It can start anytime the ignition
switch is ON. You can be injured by moving fan
blades.

•

Remove any metal jewelry such as rings, watch
bands and bracelets that could make an inadvertent
electrical contact. You could be seriously injured.

•

Batteries contain sulfuric acid that can burn your
skin or eyes and generate hydrogen gas which is
flammable and explosive. Keep open flames or
sparks away from the battery.

1. Apply the parking brake, shift the automatic transmis-

sion into PARK and turn the ignition to LOCK.

2. Turn off the heater, radio, and all unnecessary electrical

accessories.

3. Remove the protective cover over the remote positive

(+)

battery post. To remove the cover, push the locking

tab and pull upward on the cover.

4. If using another vehicle to jump start the battery, park

the vehicle within the jumper cable’s reach, set the

parking brake and make sure the ignition is OFF.

WARNING!

Do not allow vehicles to touch each other as this could
establish a ground connection and personal injury
could result.

Jump Starting Procedure

WARNING!

Failure to follow this jump starting procedure could
result in personal injury or property damage due to
battery explosion.

CAUTION!

Failure to follow these procedures could result in
damage to the charging system of the booster vehicle
or the discharged vehicle.

7

IN CASE OF EMERGENCY 303

Summary of Contents for Journey 2018








































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Journey 2018

KAP AUDI 4G HIGHEND Manual preview
AUDI 4G HIGHEND
Brand: KAP Pages: 20
Carefree Slideout Cover Service Manual preview
Slideout Cover
Brand: Carefree Pages: 12
ABL Wallbox eM4 Single Installation Manual preview
Wallbox eM4 Single
Brand: ABL Pages: 68
Volkswagen 1973 Convertible Owner'S Manual preview
1973 Convertible
Brand: Volkswagen Pages: 80
Flash Cover MN002 Installation Manual preview
MN002
Brand: Flash Cover Pages: 2
ULTIMATE SPEED 304669 Instructions For Use And Safety Manuallines preview
304669
Brand: ULTIMATE SPEED Pages: 50
M7 SPEED AGS-R2 Manual preview
AGS-R2
Brand: M7 SPEED Pages: 6
Metra Electronics 99-5819 Installation Instructions Manual preview
99-5819
Brand: Metra Electronics Pages: 8
Carcomm CHFS-34 HTC Installation Manual preview
CHFS-34 HTC
Brand: Carcomm Pages: 2
MAcarbon MAA.R8.06 Install Instructions preview
MAA.R8.06
Brand: MAcarbon Pages: 3
Dakota Digital CRS-3000-3 Manual preview
CRS-3000-3
Brand: Dakota Digital Pages: 20
Pet Gear TL9000 Instruction Manual preview
TL9000
Brand: Pet Gear Pages: 4
Suzuki IGNIS 2022 Series Manual preview
IGNIS 2022 Series
Brand: Suzuki Pages: 570
Kuda 293950 Installation Instruction preview
293950
Brand: Kuda Pages: 3
Guardsman G14776S Fitting Instruction preview
G14776S
Brand: Guardsman Pages: 2
AUTOTECH 10.297.300K-303K Installation Instructions preview
10.297.300K-303K
Brand: AUTOTECH Pages: 1
INNO TR163 Installation Instructions preview
TR163
Brand: INNO Pages: 3
Metra Electronics 95-5810 Installation Instructions Manual preview
95-5810
Brand: Metra Electronics Pages: 8

Brands by name

Popular brands

Load more brands