Dodge Journey 2018 Owner'S Manual Download Page 195 | Manualshive

Page: 195 / 519

background image

WARNING!

•

Being too close to the steering wheel or instrument
panel during front air bag deployment could cause
serious injury, including death. Air bags need room
to inflate. Sit back, comfortably extending your arms
to reach the steering wheel or instrument panel.

•

Never place a rear-facing child restraint in front of an
air bag. A deploying passenger front air bag can
cause death or serious injury to a child 12 years or
younger, including a child in a rear-facing child
restraint.

•

Only use a rear-facing child restraint in a vehicle
with a rear seat.

Driver And Passenger Front Air Bag Features
The Advanced Front Air Bag system has multistage driver

and front passenger air bags. This system provides output

appropriate to the severity and type of collision as deter-

mined by the Occupant Restraint Controller (ORC), which

may receive information from the front impact sensors (if

equipped) or other system components.

The first stage inflator is triggered immediately during an

impact that requires air bag deployment. A low energy

output is used in less severe collisions. A higher energy

output is used for more severe collisions.
This vehicle may be equipped with a driver and/or front

passenger seat belt buckle switch that detects whether the

driver or front passenger seat belt is buckled. The seat belt

buckle switch may adjust the inflation rate of the Ad-

vanced Front Air Bags.
This vehicle may be equipped with driver and/or front

passenger seat track position sensors that may adjust the

inflation rate of the Advanced Front Air Bags based upon

seat position.

WARNING!

•

No objects should be placed over or near the air bag
on the instrument panel or steering wheel because
any such objects could cause harm if the vehicle is in
a collision severe enough to cause the air bag to
inflate.

•

Do not put anything on or around the air bag covers
or attempt to open them manually. You may damage

(Continued)

5

SAFETY

193

«
...
193
194
195
196
197
...
»

Summary of Contents for Journey 2018








































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Journey 2018

UNIVERSAL CJ-2A

Brand: Jeep Pages: 27

Brand: Jeep Pages: 228

Brand: Jeep Pages: 108

Brand: Jeep Pages: 525

iBoard IB-ZK406

Brand: APS Auto Parts Specialist Pages: 3

Brand: Paxton Automotive Pages: 85

Brand: Thule Pages: 8

Brand: Subaru Pages: 99

Brand: Edelbrock Pages: 1

Brand: FORM FIT Pages: 2

Brand: muth Pages: 10

Brand: Würth Pages: 36

Brand: TATA Motors Pages: 136

Brand: JANE Pages: 58

Brand: Flash Cover Pages: 2

Brand: Porsche Pages: 98

Brand: Belkin Pages: 2

PRIME DESIGN HXR-269-E-UM3-80

Brand: Safe Fleet Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands