122
Appendix/Index
Software update
Software update
This function allows you to connect the network and check if software in
the dtab 01 needs to be updated, if software update is necessary, it
downloads software to update.
Check the NTT DOCOMO website to see if software updates are
necessary.
■
Information
·
Software update can be done even when various data, such as contacts
entries registered in terminal, camera images, mail, downloaded data, are
remaining; note that data protection sometimes cannot be secured
according to the conditions of your terminal (such as malfunction, damage,
or water leak). DOCOMO recommends backing up necessary data.
However some data such as downloaded data may not be backed up.
When updating software
·
Software update should be done with battery fully charged. You are
recommended to connect charging cable when updating software.
·
Software cannot be updated in the following cases.
-
When not connected to an access point
-
When the remaining battery is not sufficient for software update
-
When the remaining memory is not sufficient for software update
·
Software update (downloading or rewriting) may take time.
·
Other functions cannot be operated when software is being updated.
·
Stay in a place with strong radio wave condition when updating software.
Software update may be canceled if the radio wave condition is not good
enough.
·
If software update is not needed, “No updates found” is displayed.
·
When updating software, your private information concerning dtab 01
(model, serial number, etc.) is automatically sent to the server for software
update managed by DOCOMO. DOCOMO does not use the sent
information for purposes except software update.
·
If software update fails, the terminal may no longer be able to start up, or
an error message indicating update failed may be displayed and operation
may completely be no longer possible. In either instance, bring the terminal
to a repair counter specified by DOCOMO.
·
While updating software, do not activate other applications.
