10
Contents/Precautions
4. Handling mobile phones near electronic
medical equipment
■
These precautions are based on the guidelines produced at the
Electromagnetic Compatibility Conference Japan, regarding the
protection of electronic medical equipment from radio waves
emitted by mobile phone units.
WARNING
Do
Obey the following rules inside medical facilities.
·
Do not bring the terminal into operating rooms (ORs), intensive
care units (ICUs) or coronary care units (CCUs).
·
Turn the terminal OFF in hospital wards.
·
Turn the terminal OFF in hospital lobbies and corridors if electronic
medical equipment could be nearby.
·
If the medical facility has specified zones where use or possession
of mobile devices is prohibited, obey those instructions.
Do
Turn the terminal OFF in crowded trains or other public places
where pacemaker or defibrillator wearers could be nearby.
The terminal’s signals may affect the operation of implanted
pacemakers or defibrillators, and other devices.
Do
Wearers of medical equipment such as implanted
pacemakers or defibrillators must carry and use the
terminal at least 22 cm away from the implanted device.
The terminal’s signals may affect the performance of electronic
medical equipment.
Do
When electronic medical equipment other than implanted
pacemakers or defibrillators are in use outside of medical
facilities (such as in home care settings), check with the
device manufacturer to determine how the device is
affected by electrical signals.
The terminal’s signals may affect the performance of electronic
medical equipment.
5. Material list
Part
Material/Surface treatment
Terminal Display/front
Glass
Exterior case (Front frame)
PC/10%GF
Exterior case (Rear top)
PC
Exterior case (Rear bottom)
Al, sand-blasted/anodizing
Power key, volume up/down
key
PC/TPU, UV coating
microSD card slot cover
PC/TPU
microSD card slot
Stainless steel/Nickel plating,
copper alloy/gold plating,
copper alloy/tin plating
Earphone jack
LCP, PPS, copper alloy/gold
plating
External connection jack
Stainless steel/tin plating,
copper alloy/gold plating
Rear camera lens
Glass
dtab AC
adapter
01 unit
Unit
Side: PC resin/gloss
Front: PC resin/matte
Power plug
Copper alloy
USB connector
Copper, Copper/nickel
electroplating, PBT
microUSB
cable
Cable (including connector)
PVC
microUSB terminal
Nickel plating, LCP
USB terminal
Copper plating/Nickel plating,
PBT
