WRM-10P S2 USER’S MANUAL REV 1.0
64
3.11.9. Erasing Test Records From the Unit's Internal Memory
Follow the steps below to erase an individual test record or all test records from the WRM's
internal memory:
a.
Start from the “START-UP” menu:
Press the
[2]
key (
TEST RECORDS
).
b.
The following screen will be displayed:
Press the
[6]
key (
ERASE RECORD
).
c.
The following screen will be displayed:
NOTE
The above screen will be displayed only if a USB Flash drive is NOT connected
to the WRM’s USB Flash drive port. If a USB Flash drive is connected, the
following screen will be displayed:
Press the
[1]
key (
ERASE INTERNAL REC
). The following screen will be
displayed:
1.ERASE INTERNAL REC
2.ERASE THUMB DRV REC
ERASE RECORD
1.ERASE SINGLE RECORD
2.ERASE ALL RECORDS
1.PRINT RECORD
2.DISPLAY RECORD
3.SAVE RECORD
4.RESTORE RECORD
5.RECORD DIRECTORY
6.ERASE RECORD
7.COPY TO THUMB DRIVE
1.RUN TEST
2.TEST RECORDS
3.DIAGNOSTICS
4.SETUP