REV 1.0
WRM-10P S2 USER’S MANUAL
55
3.11.5. Saving a Test Record From the Working Memory
Whenever a test is performed or a test record is restored from the unit's internal memory or
from a USB Flash drive, the test data is stored in the unit's working memory. The test record in
the WRM's working memory can be saved to the unit's internal memory or to a USB Flash drive
by following the steps below:
a.
Start from the "START-UP" menu:
NOTE
If you would like to save the test record to a USB Flash drive, please insert the
USB Flash drive in the unit's "USB MEM" port.
Press the
[2]
key (
TEST RECORDS
).
b.
The following screen will be displayed:
Press the
[3]
key (
SAVE RECORD
).
If a USB Flash drive is inserted in the "USB MEM" port,
continue to step c.
If a USB Flash drive is NOT inserted in the "USB MEM" port, the following screen will be
displayed:
Press any key to return to the "START-UP" menu.
SHOT NUMBER 003
HAS BEEN SAVED!
1.PRINT RECORD
2.DISPLAY RECORD
3.SAVE RECORD
4.RESTORE RECORD
5.RECORD DIRECTORY
6.ERASE RECORD
7.COPY TO THUMB DRIVE
1.RUN TEST
2.TEST RECORDS
3.DIAGNOSTICS
4.SETUP