REV 1.0
WRM-10P S2 USER’S MANUAL
59
3.11.7. Printing a Directory of Test Records Stored in the WRM's Internal Memory
Follow the steps below to print a directory of all the test records stored in the WRM's internal
memory:
a.
Start from the "START-UP" menu:
Press the
[2]
key (
TEST RECORDS
).
b.
The following screen will be displayed:
Press the
[5]
key (
RECORD DIRECTORY
).
c.
The following screen will be displayed:
NOTE
The above screen will be displayed only if a USB Flash drive is NOT connected
to the WRM’s USB Flash drive port. If a USB Flash drive is connected, the
following screen will be displayed:
Press the
[1]
key (
INTERNAL DIRECTORY
). The following screen will be
displayed:
PRINT DIRECTORY
1. FULL DIRECTORY
2. SHORT DIRECTORY
1.INTERNAL DIRECTORY
2.THUMB DRIVE DIR
1.PRINT RECORD
2.DISPLAY RECORD
3.SAVE RECORD
4.RESTORE RECORD
5.RECORD DIRECTORY
6.ERASE RECORD
7.COPY TO THUMB DRIVE
1.RUN TEST
2.TEST RECORDS
3.DIAGNOSTICS
4.SETUP