WRM-10P S2 USER’S MANUAL REV 1.0
6
2.0 PRE-TEST SETUP
2.1
Operating Voltages
The WRM’s operating voltage is preset at the factory and is selectable between 100-120 Vac,
50/60 Hz or 200-240 Vac, 50/60 Hz.
2.2
LCD Screen Contrast Control
To increase the LCD screen contrast, press and hold the
[
]
key for two seconds.
To decrease the LCD screen contrast, press and hold the
[
]
key for two seconds.
2.3
Printer Paper Control
To advance the WRM printer paper, press and release the
[
]
key.
To retract the WRM printer paper, press and release the
[
]
key.
2.4
Printer Paper
The WRM’s built-in thermal printer uses 2.5" wide thermal paper for printing test results. To
maintain the highest print quality and to avoid paper jams, the use of thermal paper supplied
by Vanguard Instruments is highly recommended. Additional paper can be ordered from the
following sources:
Vanguard Instruments
1520 S. Hellman Avenue
Ontario, CA 91761
Tel: 909-923-9390
Fax: 909-923-9391
Part Number: VIC TP-3 paper
BG Instrument Co.
13607 E. Trent Avenue
Spokane, WA 99216
Tel: 509-893-9881
Fax: 509-893-9803
Part Number: VIC TP-3 paper