DMF RW-1016, Parts & Service Manual

Page: 70 / 110

DRILL FRAME FOR 1/2" BOLT
RELOCATE FOG LIGHT WIRING
1
DRIVER SIDE BRACKET INSTALLATION
8 8 3 5
7 7 4 6
INSTALLATION OF RAILGEAR. SEE DRAWING M101602 AND
120 FT-LBS
8
USE FACTORY HOLE
8 3
HARNESS HERE
STEP DRILL FOR CLEARANCE TO
USE ANGLE DRILL, STUB LENGTH BIT, OR
CROSSMEMBER/COOLER IF NECESSARY
60 FT-LBS
120 FT-LBS
MANUAL SECTION 4.4.
USE FACTORY HOLE
INSTALLATION NOTES:
WHEN USING FRONT MOUNT PUMP KIT 701055, INSTALL •
PUMP BRACKET AND PUMP
BEFORE
MOUNTING RAILGEAR
TO BRACKETS.
SOME FRAME COMPONENTS HIDDEN FOR CLARITY.
•
REMOVE FACTORY RUN-UNDER BRACKETS. TOW HOOKS
CAN BE LEFT IN PLACE.
RETAIN SHIMS AND REMAINING HARDWARE FOR
•
5
USE FACTORY HOLE
8 3
2
8 8 3 5
7 7 4 6
8
USE FACTORY HOLE
USE FACTORY HOLE
RELOCATE TRANSMISSION
LINE BRACKET HERE
9
A
GAS MODELS:
120 FT-LBS
120 FT-LBS
PASSENGER SIDE BRACKET INSTALLATION
60 FT-LBS
5
REV DATE DESCRIPTION BY APP
A 05/16/17
REMOVED SHIM MOUNTING HARDWARE - NOW INCLUDED IN 703057
TAM
2017+ FORD F-250/350 FRONT
ITEM
NO.
PART
NUMBER
QTY. DESCRIPTION
1 703102 1 DS FRONT BRAKCET; '17 FORD PICKUP; 4X4; RW-1016
2 703103 1 PS FRONT BRAKCET; '17 FORD PICKUP; 4X4; RW-1016
3 605573 4 HHCS, 5/8-11 X 2-1/4", GR8
4 605276 2 HHCS, 1-2/13 X 2-1/4", GR8
5 605075 4 5/8"-11 NYLOCK NUT; GR8
6 113014 2 1/2"-13 NYLOCK NUT; GR8
7 500691 4 FLAT WASHER, 1/2", GR8
8 605076 8 FLAT WASHER, 5/8", GR8
9 703057 1 MOUNTING SHIM SET; RW-1016
703058 2 MOUNTING SHIM; .375"; RW-1016
703059 2 MOUNTING SHIM; .25"; RW-1016
703060 2 MOUNTING SHIM; .125"; RW-1016
703061 2 MOUNTING SHIM; .0625"; RW-1016
605341 8 FLAT WASHER, 7/16", GR8
605276 4 HHCS, 1-2/13 X 2-1/4", GR8
113014 4 1/2"-13 NYLOCK NUT; GR8
2A AND 2B
BREAK SHARP EDGES .03 X 45° MAX
TOLERANCES (UNLESS SPECIFIED):
703100
REV: DRAWING NUMBER:
TITLE:
DATE: APPD BY: DRAWN BY:
FRAC, MACH:
METAL FABRICATORS, INC (DMF). COPYRIGHT DMF, ALL RIGHTS RESERVED.
TAM -
RW-1016
09/06/16
A
THIS DRAWING CONTAINS CONFIDENTIAL PROPRIETARY INFORMATION OF DIVERSIFIED
RW-1016
FRONT MOUNT KIT; '17 FORD PICKUP; 4X4;
FRAC, OTHER:
.X
.XX
.XXX
DRILL SIZES:
ANGULAR:
SURF FINISH:
THREADS:
± 1/32"
±1/16"
± .063
± .030
± .005
+ .015
± 1°
125 MICRO
DMF (404)875-1512