DMF RW-1016, Parts & Service Manual

Page: 15 / 110

DIVERSIFIED METAL FABRICATORS, INC. RW-1016
© 2017 DMF, Inc. All Rights Reserved. 2-5
2.4 GETTING OFF THE RAIL
2.4.1 Removing Truck from Track
1. Safely pull onto the track crossing, paying attention to traffic and other obstacles.
2. Turn on the Railgear system power switch. Leave the truck running and the transmission in
park with the parking brake set.
3. Disengage both the front and rear Railgear pinoffs (if equipped).
4. Lift both sets of Railgear (there is no preference for removal order).
5. Re-engage ALL pinoffs for safe travel in the highway position.
6. Turn off the railgear system power when not in use to prevent unintended movement.
7. Stow the Velcro steering wheel lock.
8. Make sure surrounding area is free and clear of any obstacles and vehicles before pulling off
of the rail and onto the road.