manualshive.com logo in svg

DLS 125, User Manual, Page: 36 / 76

Share
Download
DLS 125 User Manual Download Page 36

revision: 0

FlexxPump 125 (24V)

User Manual

36

EN-

SCHMIERSYSTEME

D I R E C T   L U B R I C A T I O N   S Y S T E M S

D L S

6.3.8  RUN-Menu

The RUN-Menu is used for manual activation of the FlexxPump 125. A special dona-

tion from FlexxPump 125 can be triggered in this way. This function can, for example, 

be used for the advantageous "Quick Check" to manually check the condition of the 

lubrication point.

FlexxPump 125 carries out a special donation after triggering the RUN function. Depen-

ding on the set operating mode, the FlexxPump 125 executes either one or as many 

strokes in succession as set in  the number of strokes (c) in the PRO menu. During the 

stroke, the back pressure detected by the integrated microelectronics is displayed in 

the LCD as an approximate value in bar.

There is no fault or error at FlexxPump 125.

Remove the activation and programming key from the bottom of FlexxPump 125 and 

place it on the action area.

Hold the activation and programming key on the action surface. The yellow LED lights 

up. Leave the activation and programming key on the action area until RUN is display-

ed in the LCD. Remove the activation and programming key from the action area as 

long as RUN is displayed in the LCD. The yellow LED disappears.

Ü

 The LCD flashes together with the green LED twice. The FlexxPump 125 starts deli

-

vering the lubricant to the outlet (special donation or "Quick-Check"). 

 

Insert the activation and programming key into the hole provided on the underside of 

the FlexxPump 125 or repeat the special dispenser ("Quick-Check") if necessary.

 

Observe the back pressure values displayed on the LCD if they are of interest to 

you.

During the dispensing process, the green LED lights up; in addition, the counterpres-

sure for the stroke is displayed in the LCD.

Summary of Contents for 125













































































Reviews:

No comments