manualshive.com logo in svg

DLS 125, User Manual, Page: 33 / 76

Share
Download
DLS 125 User Manual Download Page 33

revision: 0

FlexxPump 125 (24V)

User Manual

33

EN-

SCHMIERSYSTEME

D I R E C T   L U B R I C A T I O N   S Y S T E M S

D L S

6.3.6  INF-Menu operating mode Pulse-Control-Mode PUL

The INF-Menu is used to inform the user about the firmware used in the FlexxPump 

125 and the settings made and currently active.

In the INF-Menu nothing can be changed by the user. The values of the parameters are 

displayed in a fixed order.

n 

Alphanumerical name of the FlexxPump 125 firmware

PUL 

set operation mode Pulse-Control-Mode PUL

125 

set value of the cartridge size

Remove the activation and programming key from the housing of the FlexxPump 125 

and place it on the action area.

Hold the activation and programming key on the action area. The yellow LED lights 

up. Leave the activation and programming key on the action area until INF is displayed 

in the LCD. Remove the activation and programming key from the action area as long 

as INF is displayed in the LCD. The yellow LED disappears; the LCD flashes together 

with the green LED twice.

Ü

 FlexxPump 125 informs you optically on the LCD about the set values.

Insert the activation and programming key into the hole provided on the housing of 

the FlexxPump 125.

The INF-Menu can only be accessed from the OFF mode (FlexxPump 125 is swit-

ched off). When you have entered the INF-Menu, you will return to the OFF mode.

Summary of Contents for 125













































































Reviews:

No comments