revision: 0
FlexxPump 125 (24V)
User Manual
28
EN-
SCHMIERSYSTEME
D I R E C T L U B R I C A T I O N S Y S T E M S
D L S
6.3.2 Actions with the activation and programming key
The activation and programming key attached to the bottom of the FlexxPump 125
allows you to perform actions and changes in the settings of the FlexxPump 125. This
activation and programming key can be easily and permanently stored underneath
FlexxPump 125.
1. Remove the key.
Remove the activation and programming
key from the underside of the FlexxPump
125.
The activation and programming key is
permanently held magnetically in the hole
on the underside. Simply pull it out.
2. Guide the activation and programming
key to the action area (SET).
Place the activation and programming
key on the action area on the front of the
FlexxPump 125.
Ü
As soon as the activation and program-
ming key on the action area (SET) has been
detected by FlexxPump 125, the yellow LED
in the LCD lights up. The menu runs in a
rhythm of approx. 2 seconds.
Remove the activation and programming
key from the action area (SET) as long as
the desired menu item is displayed in the
LCD.
Ü
The yellow LED disappears. You have
performed an action. The LCD flashes
together with the green LED twice.