revision: 0
FlexxPump 125 (24V)
User Manual
11
EN-
SCHMIERSYSTEME
D I R E C T L U B R I C A T I O N S Y S T E M S
D L S
3.
Description of function
3.1
General information
Nr.
Benennung
0
FlexxPump 125 (24V)
1
LCD
2
Action area (for actions with the activation and programming key)
3
M12x1 electrical interface
4
Activation and programming key
5
Lubricant outlet / M16 male thread for bottom mounting
6
M5 female thread for bottom mounting
7
Serial number of the FlexxPump 125
8
M5 female thread for rear mounting
9
Cartridge sensor
10
Lubricant inlet with thread for cartridge
11
Nameplate with designation and CE mark
10
9
8
7
Fig. 1: Overview FlexxPump 125
2
1
5
6
3
0
The FlexxPump 125 is designed as an extremely compact double piston pump with
grease or oil as the lubricant. The two pistons run force-controlled and counter-rotating.
They are united on one outlet. The outlet is secured by an integrated non-return valve.
Approx. 0.15 cm³ of lubricant is pumped during each dispensing operation; multiple
dispensers can be set one after the other.
The LCD on the front panel displays the various operating states; further information
(empty cartridge, error) can be read.
The present FlexxPump1 as power supply version has an electrical interface. The sup-
plied activation and programming key can be used to adjust the operation mode and
the quantity of lubricant pumped per time in order to supply the lubrication point with the
ideal quantity of lubricant.
11
4