manualshive.com logo in svg

DLS 125, User Manual, Page: 16 / 76

Share
Download
DLS 125 User Manual Download Page 16

revision: 0

FlexxPump 125 (24V)

User Manual

16

EN-

SCHMIERSYSTEME

D I R E C T   L U B R I C A T I O N   S Y S T E M S

D L S

3. Remove the protective cap from the bot-

tom of the FlexxPump 125.

 Unscrew the yellow protective cap coun-

terclockwise from the bottom of the lubricant 

outlet of the FlexxPump 125.

 Remove the black protective cap from the 

electrical M12x1 interface.

4. Connect the electrical interface

 

 Connect the FlexxPump 125 to the exter-

nal power supply or controller via the M12x1 

interface on the side of the FlexxPump 125 

using a suitable connecting cable.

 Depending on the application, both 

connection cables with straight or angled 

sockets can be used.

 

Please refer to chapter 7.1 or chapter 

8.1 for the condition of the connection cable.

LCD

DANGER

Defective or faulty electrical connections or unauthorized live 

components can lead to serious injuries or even death.

§

    Have all electrical connection work carried out by qualified 

personnel only.

§

    Replace damaged cables or plugs immediately.

§

    Before carrying out any electrical installation work, observe the 

five safety rules of electrical engineering:

       -  Unlocking

       -  Secure against unintentional restarting.

       -  Check that there is no voltage.

       -  Ground and short-circuit.

       -  Cover adjacent live parts.

Summary of Contents for 125













































































Reviews:

No comments