manualshive.com logo in svg

DLS 125, User Manual, Page: 32 / 76

Share
Download
DLS 125 User Manual Download Page 32

revision: 0

FlexxPump 125 (24V)

User Manual

32

EN-

SCHMIERSYSTEME

D I R E C T   L U B R I C A T I O N   S Y S T E M S

D L S

6.3.5  INF-Menu operating mode Empty-Time-Mode Et

The INF-Menu is used to inform the user about the firmware used in the FlexxPump 

125 and the settings made and currently active (value of the adjustable variable Et that 

can be changed in the PRO-Menu).

In the INF-Menu nothing can be changed by the user. The values of the parameters are 

displayed in a fixed order.

n 

Alphanumerical name of the FlexxPump 125 firmware

Et 

set value of the variable Et emptying time in months

125 

value of the size of the lubricant cartridge

Remove the activation and programming key from the bottom of FlexxPump 125 and 

place it on the action area.

Hold the activation and programming key on the action surface. The yellow LED lights 

up. Leave the activation and programming key on the action area until INF is displayed 

in the LCD. Remove the activation and programming key from the action area as long 

as INF is displayed in the LCD. The yellow LED disappears; the LCD flashes together 

with the green LED twice.

Ü

 FlexxPump 125 informs you optically on the LCD about the set values.

Insert the activation and programming key into the hole provided on the underside of 

the FlexxPump 125.

The INF-Menu can only be accessed from the OFF mode (FlexxPump 125 is swit-

ched off). When you have entered the INF-Menu, you will return to the OFF mode.

Summary of Contents for 125













































































Reviews:

No comments