Putting your DLoG MPC 6 in operation
46
Manual
DLoG MPC 6
5.5.2.
DLoG antenna solutions for use in Germany
The integrated DLoG antenna solutions are based on the prevailing IEEE.802.11b
standard, which allows wireless data transfer at rates from 54 Mbps to 1 Mbps using the
2.4 GHz band.
In Germany according to regulations published in the gazette
89/2003 of the RegTP (regulating body for telecommunications and
mail), now: “Bundesnetzagentur” - Federal network agency for
electricity, gas, telecommunications, post and railway - the
maximum permissible transmitting power, EIRP (equivalent
isotropically radiated power), in the 2.4 GHz frequency band is set
at 20 dBm.
The transmitting power of the two integrated DLoG antennas (DLoG
4 dBi or DLoG 5 dBi) must be set to 30 mW (15 dBm) so that the
EIRP limit value is adhered to when using the antenna.
To set the transmitting power of the wireless card, please read the documentation on the
wireless card.
5.6.
Removing the protective film from the display
The display of the DLoG MPC 6 is protected during transport by a transparent film. This
film should remain on the display during assembly to avoid damage to the display
surface.
Only remove the film once all of the assembly work has been completed.
