Internal
devices
DLoG MPC 6
Manual
103
12.9.
Plug-in cards
A so-called riser card with a single bus master-capable PCI slot is available for the
DLoG MPC 6. This card allows you to upgrade your system with conventional ultra-short
expansion cards (max. length: 141 mm).
Before extending the module, make sure that you read the
important safety notices
at the start of this manual.
The slot bracket on the connector bay needs to be removed and replaced by the
expansion card’s slot bracket.
The riser card routes the onboard PCI bus signals from the P22 of the motherboard to a
standard plug-in slot.
Resources
The riser card itself does not require any system resources. You need to be familiar with
the plug-in card’s resource requirements to avoid conflicts with standard system
resources.
Even in worst-case operating scenarios, the power consumption of all added plug-in
cards must not exceed 20 W.
Remember to also take into account the power requirements of
external peripheral equipment (keyboard, mouse, scanner etc.)!
Installation
The plug-in card is fastened to the slot bay at the back of the unit by its slot bracket.