Putting your DLoG MPC 6 in operation
44
Manual
DLoG MPC 6
5.4.1.
Powering down the DLoG MPC 6
Always shut down the DLoG MPC 6 as follows:
1.
If your DLoG MPC 6 has a DC power pack and automatic shutdown software,
power down the device using the ignition input.
2.
If your device has an AC power pack and automatic shutdown software, power it
down using the
power
button.
3.
Remove the cable cover .
4.
Disconnect the device from the DC or AC supply voltage (pull the plug).
The DLoG MPC 6 is only shutdown once the
Power
LED has gone out.
Powering up the DLoG MPC 6
Only power up the DLoG MPC 6 when all devices have been connected and the
DLoG MPC 6 has been closed correctly (remember the cable cover!). Otherwise, you
may damage the DLoG MPC 6!