Important safety notices
6
Manual
DLoG MPC 6
2.2.
Power supply/external peripheral devices
Operation in an emergency
In case of emergency (such as damage to the power cable , or housing, or ingress of
liquid or other foreign bodies), the device must be disconnected immediately from the
power supply. Contact technical support staff at once.
Protection of the power supplies
If, after replacement, the fuse fed by the internal power supply blows again, the
device must be sent in for servicing immediately (see section
3.6.11
).
Danger of electrocution when cleaning/servicing the device
In order to avoid electrocution always disconnect the DLoG MPC 6 from the power
supply before cleaning or servicing the device.
When charging the car battery please note
While charging the car battery the DLoG MPC 6 has to be either disconnected from
the battery or it has to be determined that the maximum allowed input voltage of the
DLoG MPC 6 is not exceeded. (see sections
3.6.9
and
7.5
).
Wiring
Do not use the DLoG MPC 6 when a cable or plug is damaged. Have the damaged
parts replaced immediately!
Do not connect or disconnect any cables during storms
Data cables must never be connected or disconnected during an electrical storm.