About the MPEG4 and DivX Format
MPEG is the abbreviation of the Moving Picture Experts Group which belongs to the family of
ISO/IEC standards (International Organization for Standardization and International
Electrotechnical Commission). MPEG-4 is a compression technology for Interactive
Multimedia System. DivX is a brand-name video codec (compression-decompression)
technology codec based on the MPEG-4 standard that compresses video to small enough
sizes that it can be easily sent over the Internet, but retains a high degree of video quality.
—
This player is DivX 4 and DivX 5 compatible, which support up to home theatre profile
with maximum peak bit-rate = 10000 Kbps. The video resolution can support up to the
maximum of 720 x 480 @ 30fps and 720 x 576 @ 25fps.
—
This player supports the bitstreams that encoded in ISO MPEG-4 compliant. The visual
profile can support from Simple Profile (SP) level 0 to level 3 and Advanced Simple Profile
(ASP) level 0 to level 5, with maximum bit-rate = 8000 Kbps.
Notes
:
Ø
There are many non-standardised DVD/MPEG-4/DivX/MP3/WMA/CD-recording
procedures and copy protection procedures now in use, and many different kinds of
DVD±R, DVD±RW, CD-R and CD-RW blank disks. Therefore in some cases read errors or
read delays may be encountered. This is not a defect of the device.
Ø
This player not responsible for playability of MP3 in any case. Due to recording condition
such as PC performance, writing software, media ability or etc.
Ø
For CD-RW or CD-R, it may not be played according to the type of this disc.
Before You Switch ON
Place in Position
Ø
For setting up the unit please choose a location with sufficient air circulation around. That
prevents overheating. Don’t expose the unit to direct sunlight or other heat sources.
Ø
The product must be positioned horizontally only. Don’t put any heavy objects on its
housing.
Ø
To protect the laser unit avoid dusty surroundings. If necessary, please use a cleansing
disc carefully following its operating instructions.
Condensing Moisture
In these cases water may be condensing on the laser lens causing malfunction:
Ø
The unit is suddenly brought from a cold to a warm surrounding.
=> Please take out the disc and wait for about an hour, until the unit has warmed.
Ø
The unit is operated in a very humid surrounding.
=> Please choose a location with lower humidity.
7
