32
The correctness of
《Feedback test》and
《Controller Orientation
Test》will affect the
normal operation of the
Main Controller.
left-right; throttle: up- down. If the directions are inconsistent, users
need to re-calibration corresponding channels.
¾
Switch back to the manual mode and withdraw the test.
Figure 3.41
e)
Switch the remote controller to auto
mode(or the prompt box as above will
appear)
f)
After clicking “Controller Orientation
Test” button
¾
When helicopter inclines left, the
swash will tilt right.
¾
When helicopter inclines right, the
swash will tilt left.
¾
When helicopter inclines front, the swash will tilt back.
¾
When helicopter inclines back, the swash will tilt front。
¾
Switch back to the manual mode and withdraw the test
Note: The Main Controller will keep swash plate as horizontal as possible. Tilting horizontal angel 10°
of helicopter will lead biggest moving amplitude of swash.
g)
If the directions are not as the above, users should recheck the
installation of the main box. Then re-click “Feedback Test” to check if
everything works normally. Or re-calibration the feedback direction.
Refer to [Swash setup] [Main Controller Installation] [Instrall Param].
STEP5.
After the above tests complete, fix the Adapter on the helicopter to
prepare for the outdoors flying test
.
